KLANN-ProductCard Minimize

Return to the Search results    KL-1383-110 KA - Injector Nozzle Puller Set, Peugeot/Citroën 2.0 HDi + 2.2 HDi     

Suitable for the PSA 2.0 (110 bhp, 135 bhp) [DW10] and 2.2 [DW12] HDI TwinCam engines as found in Citroën, Ford, Fiat, Jaguar, Lancia, Peugeot, Suzuki, Volvo etc.

This really useful tool set allows for the professional removal of very tight-fitting/stuck injector nozzles, without the need for dismounting the cylinder head.

The KL-1383-110 KA injector nozzle puller set is designed for the accurate extraction of very tight-fitting injector nozzles.
The removal of the cylinder head is not necessary.
The extraction bridge is specifically designed for the above mentioned vehicles in order to ensure safe and accurate support of the puller tools, even if injectors are severely stuck or seized in place.

The special pull spindle with additional union nut (to be used on DW10 engines) will facilitate the extraction of even the most stubborn injectors.

The injector nozzle needs to be opened for this. (engines: DW10)

Note: Be sure to read and observe the injector nozzle manufacturer's directions and specifications before attempting to re-install an injector nozzle that had been opened. If necessary, have the injector nozzle tested and checked by an authorized workshop.

Procedure for Injector Nozzle Removal:
Unscrew injector nozzle head by means of the special socket included in the set. (DW10): Screw pull spindle into injector, and, if using the pull spindle with union nut, additionally screw union nut onto injector nozzle. Place pre-assembled base tool onto cylinder head and screw on shoulder nut. Extract injector nozzle by evenly rotating shoulder nut. In order to prevent impurities from entering the combustion chamber, inject compressed air into the latter.

Scope of Delivery: KL-1383-110 KA Injector Nozzle Puller Set, Peugeot/Citroën 2.0 HDi + 2.2 HDi

Part No.Description
KL-1383-1111Base Plate with Axial Bearing
KL-1383-1112Shoulder Nut, M16x1.5
KL-1383-1113Pull Spindle, M14x1.5, 132mm long
KL-1383-1114Centring Bolt, Ø 6.8mm
KL-1383-1115Support Bolt, Ø 8.9mm
KL-1383-1116Support Bolt, Ø 16x89.5mm
KL-1383-1131Brace Support Bolt, Ø 16x73.5mm
KL-1383-1001Supporting Plate
KL-1383-1021Pull Spindle, M25x1, 132mm long
KL-1383-1022Special Socket, size (waf) 25mm, ½" drive
KL-0369-4505 ASpecial Bit Insert, size (waf)10mm
KL-0369-4606 APull Spindle, M17x1, with Union Nut M27x1
KL-0369-461 ASpecial Socket, Size (waf) 29mm, ½“ drive
KL-1283-1016Cheese Head Screw, M8x30mm
KL-0014-0030Molybdenum Disulphide Paste 50g
KL-0126-221Flexible Magnetic Lifter
KL-1383-1119Plastic Storage Case
spacer
TellAFriend Minimize
spacer
Downloads Minimize
Pages of the catalog

Attachments
Register to access

Related products
spacer
dummy