KLANN-ProductCard Minimize

Return to the Search results    KL-1383-113 KA - Injector Nozzle Puller Set, Peugeot /Citroën 2.0 HDi     

Applicable to PSA 2.0 (110bhp, 135bhp) [DW10] TwinCam engines such as found in Citroën, Ford, Fiat, Lancia, Peugeot, Suzuki, Volvo etc.

This indispensable tool set allows for the professional removal of very tight-fitting injector nozzles, without the need for dismounting the cylinder head.
The injector nozzle puller KL-1383-113 KA enables accurate extraction of very tight-fitting injector nozzles as well as cleaning the injector nozzle bore and seal seat.
The removal of the cylinder head is not necessary.
The special design of the extraction bridge ensures safe and accurate support of the puller tools, even if injectors are severely stuck or seized in place.
The special pull spindle with additional union nut (to be used on DW10 engines) will facilitate the extraction of even the most stubborn injectors.
The injector nozzle needs to be opened for this. (engines: DW10)

Note: Be sure to read and observe the injector nozzle manufacturer's directions and specifications before re-installing an injector nozzle that had been opened. If necessary, have the injector nozzle tested and checked by an authorized workshop.

Procedure for Injector Nozzle Removal:
Unscrew injector nozzle head by means of the special socket included in the set. (DW10): Screw pull spindle into injector, and, if using the pull spindle with union nut, additionally screw union nut onto injector nozzle. Place pre-assembled base tool onto cylinder head and screw on shoulder nut. Extract injector nozzle by evenly rotating shoulder nut. Impurities can be prevented from entering the combustion chamber by injecting compressed air into the latter.

Scope of Delivery: KL-1383-113 KA Injector Nozzle Puller Set, Peugeot /Citroën 2.0 HDi

Part No.Description
KL-1383-1111Base Plate with Axial Bearing
KL-1383-1112Shoulder Nut, M16x1.5
KL-1383-1114Centring Bolt, Ø 6.8mm
KL-1383-1131Brace Support Bolt, Ø 16x73.5mm
KL-1383-1001Support Plate
KL-1383-1021Pull Spindle, M25x1, 132mm long
KL-1383-1022Special Socket, waf 25mm; 1/2" Drive
KL-1383-104Cleaning Tool for Injector Nozzle Seat
KL-0369-4505 ASpecial Bit Insert, Size (waf) 10mm
KL-0369-4606 APull Spindle, M17x1, with Nut, M27x1, 132mm long
KL-0369-461 ASpecial Socket, Size (waf) 29mm, 1/2" Drive
KL-0369-55 BCompressed Air Adaptor for Glow Plug Bore
KL-1283-1016Cheese Head Screw, M8x30
KL-0014-0030Molybdenum Disulphide Paste, 50g
KL-1383-1119Plastic Storage Case
TellAFriend Minimize
Downloads Minimize
Pages of the catalog

Register to access

Related products