KL-0186-310 K -
Pull Spindle Set without Drive, in a Plastic Storage Case
![]()
![]()
|
Universally suitable for injector nozzles having an M16x1, M17x1, M18, M20x1, M25x1 or M27x1 internal thread Ø, as well as for those with an M14x1.5 external thread Ø.
The set is designed for the extraction of injector nozzles that are only slightly stuck/seized in place. It is used in conjunction with slide hammer puller KL-0369-411 or KL-0369-412.
The tool set includes various special sockets and pull spindles, to allow virtually any common injector nozzles to be dismantled and removed.
Procedure:
Unscrew injector nozzle top part and threaded ring. Depending on the injector nozzle design, screw pull spindle either into or onto the injector. Then, screw slide hammer puller KL-0369-411 or KL-0369-412 (accessory) onto pull spindle. Remove injector nozzle by operating the slide hammer.
Technical Data:
| | |
| Pull spindles for external thread: | M14x1.5 |
| Pull spindles for internal thread: | M16x1; M17x1; M18; M20x1; M25x1; M27x1 |
| Union nuts: | M27x1; M25x0.5; M25x0.75 |
Scope of Delivery:
KL-0186-310 K Pull Spindle Set without Drive, in a Plastic Storage Case
| KL-0186-1611 A | Pull Spindle, M20x1 with 2 M25 Union Nuts |
| KL-0186-1612 | Pull Spindle, M16x1; 145mm |
| KL-1383-1113 | Pull Spindle, M14x1.5; 132mm |
| KL-0369-4606 A | Pull Spindle, M17x1 with M27x1 Union Nut |
| KL-1383-1021 | Pull Spindle, M25x1; 132mm |
| KL-1383-1221 | Pull Spindle, M27x1; 127mm |
| KL-0186-1711 | Pull Spindle, M18; 145mm |
| KL-0369-4505 A | Special Bit Insert, 10mm waf |
| KL-0186-2201 | Special Insert |
| KL-0369-4111 | Injector Nozzle Puller Adaptor, M18 to M16x1.5 |
| KL-0186-3190 | Plastic Storage Case |
|
|