|
KL-0039-413 K
|  | Pulling Device for Silentbloc (Mechanical Drive) | | Universally suitable for silentblocs/joint bushes with Ø of 30-73mm. |
|
KL-0039-160 E
|  | Press/Support Sleeve Set, Ø 30-90mm, short, 45mm, in a Foam Insert | | |
|
KL-0039-160
|  | Press/Support Sleeve Set, Ø 30-90mm, short, 45mm | | |
|
KL-0039-170 E
|  | Press/Support Sleeve Set, Ø 30-90mm, long, 115mm, in a Foam Insert | | |
|
KL-0039-170
|  | Press/Support Sleeve Set, Ø 30-90mm, long, 115mm | | |
|
KL-0039-190 EA
|  | Spindle/Drive Tool Kit, in a Foam Insert (M-005A-04A) | | |
|
KL-0039-191 EA
|  | Spindle/Drive Tool Kit with 4.8kg Slide Hammer Puller, in a Foam Insert | | |
|
KL-0039-1011
|  | Retaining Adaptor for Mechanical Spindle | | |
|
KL-0040-2592
|  | Safety Belt for Mechanical Pulling Devices | | |
|
KL-0039-2010
|  | Pull Spindle, M10x1.25, with Nuts | (German Utility Model) | |
|
KL-0039-2014
|  | Pull Spindle, M14, with Nuts | (German Utility Model) | |
|
KL-0039-2016
|  | Pull Spindle, M16, with Nuts | | |
|
KL-0039-2018
|  | Pull Spindle, M18, with Nuts | | |
|
KL-0039-2020-1
|  | Pull Spindle, M20 | | |
|
KL-0040-2800
|  | Hydraulic Cylinder, 28t | | |
|
KL-0040-2500
|  | Hydraulic Cylinder, 17t | | |
|
KL-0040-2520
|  | Adaptor, 3/8", NPT to 1/4" NPT | | Suitable for GEDORE Automotive, Longus, Rodcraft etc. |
|
KL-0040-2521
|  | Adaptor, 3/8" NPT to M16x1.5 | | Suitable for Matra etc. |
|
KL-0040-2522
|  | Adaptor, 3/8" NPT to M18x1.5 | | Suitable for Weber etc. |
|
KL-0040-2523
|  | Adaptor, 3/8" NPT to G1/4" | | Suitable for Nike etc. |
|
KL-0215-321
|  | Coupling Half, 1/4" (Hose Side) | | |
|
KL-0215-322
|  | Coupling Half, (Cylinder Side) | | |
|
KL-0215-35 M25
|  | Hydraulic Hand Pump | | |
|
KL-0215-36 M25
|  | Hydraulic Pump (Pneumatic) | | |
|
KL-0215-37 M25
|  | Hydraulic Foot Pump | | |
|
KL-0040-2528
|  | Pressure Gauge for KL-0040-2500, with 3/8“ NPT Connection Thread | | Suitable for KL-0215-37 etc. |
|
KL-0040-2529
|  | Pressure Gauge for KL-0040-2500, with 1/4“ NPT Connection Thread | | Intended for use with KL-0215-35 and KL-0215-36 etc. |
|
KL-0039-1002
|  | Retaining Adaptor with O-Rings, for Clamping Nut and Pressure Spindle | | |
|
KL-0039-1003
|  | Retaining Adaptor with O-Rings, for Hydraulic Cylinder | | |
|
KL-0039-1004
|  | Retaining Adaptor with O-Rings, for Pressure Spindle (Ø 18mm) | | |
|
KL-0039-1910
|  | Pull Spindle, M10x1.25, with Nut | (German Utility Model) | |
|
KL-0039-1912
|  | Pull Spindle, M12, with Nut | | |
|
KL-0039-1914
|  | Pull Spindle, M14, with Nut | | |
|
KL-0039-1916
|  | Pull Spindle, M16, with Nut | | |
|
KL-0039-1920
|  | Pull Spindle, M20, with Clamping Nut | (German Utility Model) | |
|
KL-0039-1930
|  | Pressure Spindle with O-Ring, M20x350 | | |
|
KL-0039-1931
|  | Pressure Spindle with O-Ring, M20x405 | | |
|
KL-0040-2590
|  | Safety Belt for Hydraulic Cylinder (17t) | | |
|
KL-0040-258 A
|  | Retaining Device for Hydraulic Cylinder KL-0040-2500 | | |
|
KL-0040-2588
|  | Adaptor Sleeve, VW, Ø 36mm | | |
|
KL-0040-2810
|  | Pressure Spindle, M24 | | |
|
KL-0040-2812
|  | Pull Spindle, M24, with Clamping Nut | | Suitable for hydraulic cylinder KL-0040-2800. |
|
KL-0040-2846
|  | Pull Spindle, M20, with Clamping Nut | | |
|
KL-0040-2829
|  | Pressure Gauge for KL-0040-2800, with 1/4“ NPT Connection Thread | | Suitable for KL-0215-35 and KL-0215-36 etc. |
|
KL-0040-2828
|  | Pressure Gauge for KL-0040-2800, with 3/8“ NPT Connection Thread | | Suitable for KL-0215-36 etc. |
|
KL-0040-2890
|  | Safety Belt for Hydraulic Cylinder (28t) | | |
|
KL-0215-35 M28
|  | Hydraulic Hand Pump | | |
|
KL-0215-36 M28
|  | Hydraulic Pump (Pneumatic) | | |
|
KL-0215-37 M28
|  | Hydraulic Foot Pump | | |
|
KL-0040-288
|  | Retaining Device for Hydraulic Cylinder KL-0040-2800 | | |
|
KL-0040-2571
|  | Adaptor Sleeve, Ø 25mm | | |
|
KL-0039-1140
|  | Press Frame (Lightweight, Short Design) | | |
|
KL-0039-115
|  | Frame Bars (Pair), 350mm long, with Hex Nuts | | |
|
KL-0039-1110
|  | Press Frame (Short Design) | | |
|
KL-0039-113
|  | Frame Bars (Pair), 350mm long, with Cheese Head Screws | | |
|
KL-1000-03
|  | Stand for Press Frame | | |
|
KL-0039-1106
|  | Adaptor with O-Ring, M42x2 to Ø 30mm | | |
|
KL-0039-1105
|  | Adaptor with O-Ring, 2¼"-14 UNS to Ø 30mm | | |
|
KL-0040-2855
|  | Adaptor, 2¼"-14 UNS to 2¾"-16 UN | | |
|
KL-0174-559
|  | Adaptor, 2¼"-14 UNS to 2¼"-14 UNS | | |
|
KL-0174-561
|  | Adaptor, 2¼"-16 UN to 2¼"-14 UNS | | |
|
KL-0174-562
|  | Adaptor, 2¾"-16 UN to 2¼"-14 UNS | | |
|
KL-0174-563
|  | Adaptor, 2¼"-14 UN to Ø 60mm | | Component for the assembly of a puller from the KL-0174-..Puller Series. |
|
KL-0174-565
|  | Adaptor, M68x2 to 2¼"-14 UNS | | |
|
KL-0045-7021
|  | Adaptor (Pin Ø 20mm) | | |
|
KL-0039-1935
|  | Thrust Piece | | |
|
KL-0039-7503
|  | Sleeve Set, Mercedes Sprinter/VW LT (2D) | | Suitable for changing suspension ball joints on Mercedes Sprinter (901-904) models from 1995-2006 and VW LT (2D) models from1996-2006. |
|
KL-0039-753
|  | Pressing Device with Hydraulic Cylinder, Mercedes Sprinter (W906)/VW Crafter (2E/2F) | | Suitable for Mercedes Sprinter (W906) from 2006 onwards and VW Crafter (2E/2F) from 2006 onwards, suspension ball joint on the front lower wishbone. |
|
KL-0039-7530
|  | Pressing Device without Hydraulic Cylinder, Mercedes Sprinter (W906)/VW Crafter (2E/2F) | | Suitable for Mercedes Sprinter (W906) from 2006 onwards and VW Crafter (2E/2F) from 2006 onwards, suspension ball joint on the front lower wishbone. |
|
KL-0039-7533
|  | Sleeve Set, Mercedes Sprinter (W906)/VW Crafter (2E/2F) | | Suitable for Mercedes Sprinter (W906) from 2006 onwards and VW Crafter (2E/2F) from 2006 onwards, suspension ball joint on the front lower wishbone. |
|
KL-0039-7534
|  | Support Sleeve with Clamping Washer, Mercedes Sprinter (W906)/VW Crafter (2E/2F) | | Suitable for Mercedes Sprinter (W906) from 2006 onwards and VW Crafter (2E/2F) from 2006 onwards, suspension ball joint on the front lower wishbone. |
|
KL-0039-7535
|  | Upgrade Kit for KL-0039-750, Mercedes Sprinter (W906)/VW Crafter (2E/2F) | | Suitable for Mercedes Sprinter (W906) from 2006 onwards and VW Crafter (2E/2F) from 2006 onwards, suspension ball joints on the front lower wishbone. |
|
KL-0610-141
|  | Sleeve Set, Ford Transit (from 2000 onwards) | | Suitable for Ford Transit (from 2000 onwards) |
|
KL-1011-100
|  | Set of Sleeves for Brass Bushing, Renault | | Suitable for brass bushings with Ø of 45mm; e.g. front axle leaf springs on Renault Premium (1997-2005) and Magnum AE. |
|
KL-1011-11
|  | Pulling Device with 28t Hydraulic Cylinder, for HGV Silentbloc Ø 139mm | | Suitable for silentblocs with Ø of 139mm (removed approx. Ø 151-157mm), e.g. SAF INTRADISC plus air suspension axles, Mercedes DCA axle system with 3D pivot bush (A 946 390 02 50) and Mercedes HT 250 air suspension unit with 3D socket (A 946 390 00 50). |
|
KL-1011-110
|  | Pulling Device without Hydraulic Cylinder, for SAF HGV Silentbloc Ø 139mm | | Suitable for silentblocs with Ø of 139mm; e.g. SAF INTRADISC plus air suspension axles. |
|
KL-1011-111
|  | Set of Sleeves for SAF HGV Silentbloc Ø 139mm | | Suitable for silentblocs with Ø of 139mm; e.g. SAF INTRADISC plus air suspension axles. |
|
KL-1001-10
|  | Pulling Device with Hydraulic Cylinder, for HGV Silentblocs (Ø 68mm) | | Suitable for silentblocs with 68mm Ø;
e.g. those on beam springs for ROR, SAF, and Trailor with trailers and semi-trailers etc. equipped with air suspension systems. |
|
KL-1001-100
|  | Pulling Device without Hydraulic Cylinder, for HGV Silentblocs with Ø 68mm | | Suitable for silentblocs with 68mm Ø;
e.g. those on beam springs for ROR, SAF und Trailor with trailers and semi-trailers, etc. equipped with air suspension systems. |
|
KL-1001-101
|  | Set of Sleeves, Ø 68mm | | Suitable for silentblocs with a 68mm Ø;
e.g. those on beam springs for ROR, SAF und Trailor with trailers and semi-trailers, etc. equipped with air suspension systems. |
|
KL-1001-200
|  | Pulling Device without Hydraulic Cylinder, for HGV Trailer Drawbar | | Suitable for brass bushings with a length of up to 100mm, and with internal/external diameters 28/34mm, 30/34mm, 30/35mm, 30/36mm, 30/37mm and 30/38mm as used on HGV trailer drawbars. |
|
KL-1001-201
|  | Set of Sleeves for HGV Trailer Drawbar | | Suitable for brass bushings with a length of up to 100mm, and with internal/external diameters 28/34mm, 30/34mm, 30/35mm, 30/36mm, 30/37mm and 30/38mm, as used on HGV trailer drawbars. |
|
KL-1001-25 A
|  | Pulling Device with Hydraulic Cylinder, for Drawbar Silentbloc | | Suitable for silentblocs with Ø of 57mm, for example for those fitted to „Regensburger“ HGV trailer drawbars. |
|
KL-1001-250 A
|  | Pulling Device without Hydraulic Cylinder, for Drawbar Silentbloc | | Suitable for silentblocs with Ø of 57mm, for example for those on „Regensburger“ HGV trailer drawbars. |
|
KL-1001-251 A
|  | Set of Sleeves for Drawbar Silentbloc | | Suitable for silentblocs with Ø of 57mm, for example for those found on „Regensburger“ HGV trailer drawbars. |
|
KL-1001-300
|  | Sleeve Set, Ø 50mm | | Universally suitable for draw bar bushings having an external Ø of 50mm. |
|
KL-1002-241
|  | Pressure Piece/Sleeve Set, for Brass Bushing Ø 32mm | | Suitable for brass bushings with 32mm Ø, e.g. for those found on Renault Midlum/D leaf springs.
Alternative tool: 74 88 840 167 |
|
KL-1002-22
|  | Pulling Device with Hydraulic Cylinder, for Silentbloc Ø 40mm | | Suitable for silentblocs with Ø 40mm (bead Ø 50mm), for example for those fitted to Renault Midlum/D, 4x4 Midlum/D leaf spring eye, bearing bracket etc. |
|
KL-1002-220
|  | Pulling Device, without Hydraulic Cylinder | | Suitable for silentblocs with Ø 40mm (bead Ø 50mm), for example for those on Renault Midlum / D, 4x4 Midlum / D leaf spring eye, bearing bracket etc. |
|
KL-1002-221
|  | Pressure Piece/Sleeve Set, for Silentbloc Ø 40mm | | Suitable for silentblocs with 40mm Ø (bead Ø 50mm).
For example: Renault silentblocs (No. 50 10 294 961 and 50 00 448 404) as found on Renault Midlum/D, 4x4 Midlum/D leaf spring eye, bearing bracket etc.
Alternative tool: 74 88 840 165 |
|
KL-1002-231
|  | Pressure Piece/Sleeve Set, for Silentbloc Ø 50mm | | Suitable for silentblocs with 50mm Ø (bead Ø 62mm).
For example: Renault silentbloc (No. 50 10 294 770 and 50 00 448 405) as found on Renault Midlum/D, 4x4 Midlum/D.
Alternative tool: 74 88 840 166 |
|
KL-1002-25
|  | Pulling Device with Hydraulic Cylinder, for Silentbloc with Ø 50mm | | Suitable for solid metal silentblocs with Ø 50mm, for example for those fitted to Renault Midlum/D, Premium/T, Magnum/T; Volvo FE, FM, FH. |
|
KL-1002-250
|  | Pulling Device with Hydraulic Cylinder, for Silentbloc with Ø 50mm | | Suitable for solid metal silentblocs with Ø 50mm, for example for those on Renault Midlum/D, Premium/T, Magnum/T; Volvo FE, FM, FH. |
|
KL-1002-251
|  | Pressure Piece/Sleeve Set, for Silentbloc Ø 50mm | | Suitable for solid metal silentblocs with 50mm Ø, e.g. for those on Renault Midlum/D, Premium/T, Magnum/T; Volvo FE, FM, FH.
Alternative tool: 74 88 840 168 |
|
KL-1002-21 A
|  | Pulling Device with Hydraulic Cylinder, for Silentbloc Ø 64mm | | Suitable for Renault HGV: Magnum/T, Premium/T, Midlum/D. |
|
KL-1002-210 A
|  | Pulling Device without Hydraulic Cylinder, for Silentbloc Ø 64mm | | Suitable for Renault silentblocs (No. 74 82 437 307 and 74 82 392 503) as found on Renault Magnum/T, Premium/T, Midlum/D. |
|
KL-1002-211
|  | Pressure Piece/Sleeve Set, Ø 64mm | | Applicable to: Renault Magnum/T, Premium/T, Midlum/D.
Alternative tool: 74 88 840 077 |
|
KL-1010-104
|  | Drive Tool Kit with Hydr. Cyl. (17t), for Silentblocs with Ø of up to 50mm | | |
|
KL-1010-105
|  | Drive Tool Kit without Hydraulic Cylinder, Ø 50mm | | |
|
KL-1010-1050
|  | Set of Drive Sleeves, Ø 50mm | | |
|
KL-1010-100 A
|  | Drive Tool Kit with Hydr. Cyl. (17t), for Silentbloc with Ø of up to 70mm | | |
|
KL-1010-101 A
|  | Drive Tool Kit without Hydraulic Cylinder, Ø 70mm | | |
|
KL-1010-1010
|  | Set of Drive Sleeves, Ø 70mm | | |
|
KL-1010-102
|  | Drive Tool Kit with Hydr. Cyl. (17t), for Silentblocs with Ø of up to 90mm | | |
|
KL-1010-103
|  | Drive Tool Kit without Hydraulic Cylinder, Ø 90mm | | |
|
KL-1010-1030
|  | Drive Sleeve Set, Ø 90mm | | |
|
KL-1010-101 M28
|  | Drive Tool Kit without Hydraulic Cylinder, Ø 70mm | | |
|
KL-1010-1010
| | Set of Drive Sleeves, Ø 70mm | | |
|
KL-0040-2846
| | Pull Spindle, M20, with Clamping Nut | | |
|
KL-1010-11 A
|  | Pulling Device with Hydraulic Cylinder (17t), for HGV Silentbloc Ø 55mm | | Suitable for split-type silentbocs (old and new versions) with Ø 55mm (old version removed with Ø 57mm / new version removed with Ø 58mm)
e.g. MAN all-wheel-drive L80 (12t), L90 (13t), M34 (14t), M78 (18t) front spring bracket rear silentbloc. |
|
KL-1010-100 A
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentbloc with Ø of up to 70mm | | |
|
KL-1010-110 A
|  | Pressure Piece/Sleeve Set, Ø 55mm | | Suitable for split-type silentbocs with Ø of 55mm (removed 57mm)
e.g. MAN all-wheel-drive L80 (12t), L90 (13t), M34 (14t), M78 (18t) front spring bracket rear silentbloc. |
|
KL-1010-12
|  | Pulling Device with Hydraulic Cylinder (17t), for HGV Silentbloc Ø 60mm | | Applicable to split-type silentblocs with Ø of 60mm (removed 62mm), e.g. Mercedes Actros leaf spring, front, and Renault silentblocs (No. 74 82 054 079, 50 10 557 875, 74 20 839 455, 74 21 622 369, 74 21 646 217 and 74 20 929 989) as found on Renault Midlum / D, Premium / T, Magnum / T, Kerax / C; DAF 65 CF, 75 CF, 85 CF, LF55; Volvo FE, FM, FH, FMX., leaf spring and bearing bracket. |
|
KL-1010-100 A
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentbloc with Ø of up to 70mm | | |
|
KL-1010-120
|  | Pressure Piece/Sleeve Set, Ø 60mm | | Suitable for split-type silentblocs with Ø 60mm (removed 62mm); e.g. Mercedes Actros leaf spring front silentbloc and Renault silentblocs (No. 74 82 054 079, 50 10 557 875, 74 20 839 455, 74 21 622 369, 74 21 646 217 and 74 20 929 989) as found on Renault Midlum / D, Premium / T, Magnum / T, Kerax / C; DAF 65 CF, 75 CF, 85 CF, LF55; Volvo FE, FM, FH, FMX. Leaf spring and bearing bracket. |
|
KL-1010-121
|  | Pressure Piece/Sleeve Set without Hydraulic Cylinder, for HGV Silentbloc Ø 60mm | | Suitable for split-type and solid-type silentblocs with Ø of 60mm (split-type silentbloc removed with 62mm Ø); e.g. Mercedes Actros leaf spring front silentblocs, and Renault Silentblocs (No. 74 82 054 079, 50 10 557 875, 74 20 839 455, 74 21 622 369, 74 21 646 217 and 74 20 929 989) on Renault Midlum/D, Premium/T, Magnum/T, Kerax/C; Volvo FE, FM, FH, FMX. Leaf spring and bearing bracket.
Alternative tool: 74 88 840 079 |
|
KL-1010-13
|  | Pulling Device with Hydraulic Cylinder (17t), for HGV Silentbloc Ø 63mm | | Suitable for split-type silentblocs with Ø of 63mm (removed 65mm); e.g. MAN TGA front spring bracket rear silentbloc. |
|
KL-1010-100 A
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentbloc with Ø of up to 70mm | | |
|
KL-1010-130
|  | Pressure Piece/Sleeve Set, Ø 63mm | | Suitable for split-type silentblocs with Ø of 63mm (removed 65mm); e.g. MAN TGA front spring bracket rear silentbloc. |
|
KL-1010-14 A
|  | Pulling Device with Hydraulic Cylinder (17t), for HGV Silentbloc Ø 65mm | | Suitable for split-type silentblocs with Ø of 65mm (removed 70mm), as found on Mercedes Actros front axle stabiliser bar, and MAN TGA, TGX, F2000, rear axle stabiliser bar. |
|
KL-1010-100 A
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentbloc with Ø of up to 70mm | | |
|
KL-1010-140 A
|  | Pressure Piece/Sleeve Set, Ø 65mm | | Suitable for split-type silentblocs with Ø of 65mm (removed 70mm) as found on Mercedes Actros front axle anti-roll bars. |
|
KL-1010-16
|  | Pulling Device with Hydraulic Cylinder (17t) for HGV Silentbloc Ø 84mm | | Suitable for split-type silentblocs with Ø of 84mm (removed 87mm) as found on Mercedes buses O405, O408, Citaro. |
|
KL-1010-102
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentblocs with Ø of up to 90mm | | |
|
KL-1010-17
|  | Pulling Device with Hydraulic Cylinder, for HGV Silentbloc Ø 58mm | | Suitable for split-type silentblocs with Ø of 58mm (removed 60mm), e.g. on Mercedes SK leaf spring. |
|
KL-1010-100 A
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentbloc with Ø of up to 70mm | | |
|
KL-1010-170
|  | Pressure Piece/Sleeve Set, Ø 58mm | | Suitable for split-type silentblocs with Ø of 58mm (removed 60mm) e.g. Mercedes SK leaf spring. |
|
KL-1010-104
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentblocs with Ø of up to 50mm | | |
|
KL-1010-180
|  | Pressure Piece/Sleeve Set, Ø 45mm | | Suitable for split-type silentblocs with Ø of 45mm (removed 48mm) e.g. MAN buses (articulated bus 313/3) front axle stabilizer bar. |
|
KL-1010-190 A
|  | Pressure Piece/Sleeve Set, Ø 48mm | | Suitable for split-type silentblocs with Ø of 48mm (removed 50mm) as found on front axle stabilizers and front axle suspensions. Installed in MAN buses of the A21 Series (e.g. NL 313, NG 313). |
|
KL-1010-18
|  | Pulling Device with 17t Hydraulic Cylinder, for HGV Silentbloc Ø 45mm | | Suitable for split-type silentblocs with Ø of 45mm (removed 48mm), e.g. MAN buses (articulated bus 313/3) front axle stabilizer bar. |
|
KL-1010-104
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentblocs with Ø of up to 50mm | | |
|
KL-1010-180
| | Pressure Piece/Sleeve Set, Ø 45mm | | Suitable for split-type silentblocs with Ø of 45mm (removed 48mm) e.g. MAN buses (articulated bus 313/3) front axle stabilizer bar. |
|
KL-1010-19 A
|  | Pulling Device with 17t Hydraulic Cylinder, for HGV Silentbloc Ø 48mm | | Suitable for the split-type silentblocs with Ø of 48mm (removed 50mm) found at the front axle stabiliser bar and front axle suspension of MAN buses of the A21 Series (e.g. NL 313, NG 313). |
|
KL-1010-104
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentblocs with Ø of up to 50mm | | |
|
KL-1010-190 A
| | Pressure Piece/Sleeve Set, Ø 48mm | | Suitable for split-type silentblocs with Ø of 48mm (removed 50mm) as found on front axle stabilizers and front axle suspensions. Installed in MAN buses of the A21 Series (e.g. NL 313, NG 313). |
|
KL-1010-22
|  | Pulling Device with Hydraulic Cylinder (17t), for HGV Silentbloc Ø 75mm | | Suitable for split-type silentblocs with Ø of 75mm (removed 80mm), e.g. Mercedes Actros and Atego rear axle anti-roll bar. |
|
KL-1010-102
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentblocs with Ø of up to 90mm | | |
|
KL-1010-220
|  | Pressure Piece/Sleeve Set, Ø 75mm | | Suitable for split-type silentblocs with Ø of 75mm (removed 80mm), e.g. Mercedes Actros and Atego rear axle anti-roll bar. |
|
KL-1010-24
|  | Pulling Device with 17t Hydraulic Cylinder, for HGV Silentbloc Ø 51mm | | Applicable to both split-type and solid-type silentblocs with 51mm Ø (split-type silentbloc removed with Ø of 52mm) as found on Volvo FM, FH and Renault etc. |
|
KL-1010-100 A
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentbloc with Ø of up to 70mm | | |
|
KL-1010-240
|  | Pressure Piece/Sleeve Set, Ø 51mm | | Applicable to both split-type and solid-type silentblocs with 51mm Ø (split-type silentbloc removed with Ø of 52mm) as found on Volvo FM, FH and Renault etc. |
|
KL-1010-21 A
|  | Pulling Device with 17t Hydraulic Cylinder, for HGV Silentbloc Ø 68mm | | Applicable to both split-type and solid-type silentblocs with Ø of 68mm (split-type silentbloc removed Ø 70mm), e.g. as found on Mercedes, MAN F2000 leaf spring. |
|
KL-1010-102
| | Drive Tool Kit with Hydr. Cyl. (17t), for Silentblocs with Ø of up to 90mm | | |
|
KL-1010-210 A
|  | Pressure Piece/Sleeve Set, Ø 68mm | | Suitable for split-type and solid-type silentblocs with Ø of 68mm (split-type silentbloc removed Ø 70mm), e.g. Mercedes Actros and Atego rear axle anti-roll bar. |
|
KL-1010-51
|  | Pressing Device with 28t Hydr. Cylinder, for HGV Silentbloc Ø 85mm | | Suitable for split-type silentblocs with Ø of 85mm (88mm when removed)
as found on Mercedes Actros and Atego rear axle anti-roll bar. |
|
KL-1010-500
|  | Drive Tool Kit with Press Frame and Hydr. Cyl., Ø 70mm | | Suitable for split-type silentblocs with Ø of 85mm (removed 88mm), e.g. Mercedes Actros and Atego rear axle anti-roll bar. |
|
KL-1010-501
|  | Drive Tool Kit without Hydraulic Cylinder, Ø 70mm | | Suitable for split-type silentblocs with Ø of 85mm (removed 88mm), e.g. Mercedes Actros and Atego rear axle anti-roll bars. |
|
KL-1010-1030
| | Drive Sleeve Set, Ø 90mm | | |
|
KL-1010-510
|  | Pressure Piece/Sleeve Set, Ø 85mm | | Suitable for split-type silentblocs with Ø of 85mm (removed 88mm), e.g. Mercedes Actros and Atego rear axle anti-roll bars. |
|
KL-1010-52
|  | Pressing Device with Hydraulic Cylinder (28t), for HGV Silentbloc Ø 70mm | | Suitable for the split-type silentbocs with Ø of 70mm as found on longitudinal struts at the front axle and trailing axle of e.g. Mercedes Actros MP2, MP3. |
|
KL-1010-500
| | Drive Tool Kit with Press Frame and Hydr. Cyl., Ø 70mm | | Suitable for split-type silentblocs with Ø of 85mm (removed 88mm), e.g. Mercedes Actros and Atego rear axle anti-roll bar. |
|
KL-1010-520
|  | Pressure Piece/Sleeve Set, Ø 70mm | | Suitable for the split-type silentbocs with Ø of 70mm as found on longitudinal struts at the front axle and trailing axle of e.g. MB Actros MP2, MP3. |
|
KL-1001-40
|  | Pulling Device for Stabiliser Silentbloc, Mercedes Actros | | Suitable for the silentblocs found on driver cab stabilisers of Mercedes Benz HGVs/commercial vehicles.
For example, fitted to Mercedes-Benz Actros MP3 and MP4. |
|
KL-1001-400
|  | Sleeve Kit | | Suitable for stabiliser and driver cab silentblocs found on front axle stabilisers on, e.g., Mercedes-Benz Actros MP3 and MP4. |
|
KL-0159-11
|  | Set of Pressure Pieces, with Storage Case | | |
|
KL-1000-20 A
|  | King Pin Press (65t), with Sleeve Set | | Universally suitable for use on HGVs. |
|
KL-1000-200 A
|  | King Pin Press (65t), without Sleeve Set | | Universal application. |
|
KL-1000-230 A
|  | Sleeve Set | | Universal application. |
|
KL-1000-2640
|  | Mandrel, Ø 40mm, Length 95mm | | Suitable for the king pins found at the front axle of, e.g., Volvo HGVs/commercial vehicles. |